टेम्पलेट:Infobox bridge/doc

Sydney Harbour Bridge
Sydney Harbour Bridge
लोकेशन	33°51′8″S 151°12′38″E / 33.85222°S 151.21056°E
इस्तेमाल	Trains, Motor vehicles, pedestrians and bicycles
पार करे ला	Port Jackson
जगह	Sydney, New South Wales, Australia
बिसेसता
डिजाइन	Through arch bridge
कुल लंबाई	1,149 मी (3,770 फीट)
चौड़ाई	49 मी (161 फीट)
ऊँचाई	134 मी (440 फीट)
सभसे लमहर खंड	503 मी (1,650 फीट)
ऊपरी क्लियरेंस	(?)
नीचे के क्लियरेंस	49 मी (161 फीट) at mid-span
इतिहास
बनावे सुरू	28 July 1923
पूरा भइल	19 January 1932
खोलल गइल	19 March 1932
	Sydney Harbour Bridge New South Wales में लोकेशन

Using location map
Using location map
लोकेशन	0°N 0°E / 0°N 0°E
{{{extra}}}
	{{{map_dot_label}}} {{{map_caption}}}

{{{name}}}
{{{native_name}}}
{{{name}}}; {{{native_name}}}
	[[File:{{{image}}}\|{{{image_size}}}\|alt={{{alt}}}\|upright={{{image_upright}}}]] {{{caption}}}
लोकेशन	{{{coordinates}}}
ओएस ग्रिड संदर्भ	{{{os_grid_reference}}}
इस्तेमाल	{{{carries}}}
पार करे ला	{{{crosses}}}
जगह	{{{locale}}}
ऑफिशियल नाँव	{{{official_name}}}
अउरी नाँव	{{{other_name}}}
नाँवधराई	{{{named_for}}}
मालिक	{{{owner}}}
मेंटेनेंस	{{{maint}}}
धरोहर के दर्जा	{{{heritage}}}
{{{id_type}}}	{{{id}}}
वेबसाइट	{{{website}}}
Preceded by	{{{preceded}}}
Followed by	{{{followed}}}
बिसेसता
डिजाइन	{{{design}}}
मटेरियल	{{{material}}}
ट्राफ़ निर्माण	{{{material1}}}
खम्हा निर्माण	{{{material2}}}
कुल लंबाई	{{{length}}}
चौड़ाई	{{{width}}}
ऊँचाई	{{{height}}}
पानी के गहिराई	{{{depth}}}
Traversable?	{{{traversable}}}
Towpaths	{{{towpath}}}
सभसे लमहर खंड	{{{mainspan}}}
खंड सं.	{{{number_spans}}}
पानी में खम्हा	{{{piers_in_water}}}
लोड सीमा	{{{load}}}
ऊपरी क्लियरेंस	{{{clearance_above}}}
नीचे के क्लियरेंस	{{{clearance_below}}}
लेन सं.	{{{lanes}}}
डिजाइन उमिर	{{{life}}}
रेल संबंधी बिसेस्ता
पटरी संख्या	{{{num_track}}}
पटरी चौड़ाई	{{{track_gauge}}}
संरचना के चौड़ाई	{{{structure_gauge}}}
बिजलीकरण	{{{electrification}}}
इतिहास
आर्किटेक्ट	{{{architect}}}
डिजाइनर	{{{designer}}}
Contracted lead designer	{{{contracted_designer}}}
Successful competition design	{{{winner}}}
Engineering design by	{{{engineering}}}
निर्माणकरता	{{{builder}}}
Fabrication by	{{{fabricator}}}
बनावे सुरू	{{{begin}}}
पूरा भइल	{{{complete}}}
कुल लागत	{{{cost}}}
उदघाटन	{{{inaugurated}}}
खोलल गइल	{{{open}}}
दोबारा बनल	{{{rebuilt}}}
भँसल/ढहल	{{{collapsed}}}
बंद भइल	{{{closed}}}
जगह लिहलस	{{{replaces}}}
एकरे जगह अब	{{{replaced_by}}}
सांख्यिकी
डेली आवाजाही	{{{traffic}}}
चुंगी	{{{toll}}}
{{{extra}}}
	[[File:{{{map_image}}}\|{{{map_size}}}\|alt={{{map_alt}}}\|upright={{{map_upright}}}]] {{{map_caption}}}

ई टेम्पलेट:Infobox bridge के प्रलेखन उपपन्ना ह।
इहाँ उपयोग खातिर जानकारी, श्रेणी सभ आ अउरी दूसर सामग्री मौजूद बा जेवन की मूल टेम्पलेट पन्ना के हिस्सा ना हवे।

This template uses Lua:

Usage

Copy and paste the template below:

{{Infobox bridge
| name                = 
| native_name         = 
| native_name_lang    = 
| image               = 
| image_upright       = 
| alt                 = 
| caption             = 
| coordinates         = <!-- {{Coord}} -->
| os_grid_reference   = 
| carries             = 
| crosses             = 
| locale              = 
| official_name       = 
| other_name          = 
| named_for           = 
| owner               = 
| maint               = 
| heritage            = 
| id                  = 
| id_type             = 
| website             = 
| preceded            = 
| followed            = 
| design              = 
| material            = 
| material1           = 
| material2           = 
| length              = 
| width               = 
| height              = 
| depth               = 
| traversable         = 
| towpath             = 
| mainspan            = 
| number_spans        = 
| piers_in_water      = 
| load                = 
| clearance_above     = 
| clearance_below     = 
| lanes               = 
| life                = 
| num_track           = 
| track_gauge         = 
| structure_gauge     = 
| electrification     = 
| architect           = 
| designer            = 
| contracted_designer = 
| winner              = 
| engineering         = 
| builder             = 
| fabricator          = 
| begin               = 
| complete            = 
| cost                = 
| open                = <!-- or | opening = -->
| inaugurated         = 
| rebuilt             = 
| collapsed           = 
| closed              = 
| replaces            = 
| replaced_by         = 
| traffic             = 
| toll                = 
| map_type            = 
| map_relief          = 
| map_dot_label       = 
| map_image           = 
| map_size            = 
| map_alt             = 
| map_caption         = 
}}

Parameters

name: Name of bridge
native_name: Name of the bridge in the local language, if different
native_name_lang: ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.
image: Filename of image of the bridge
image_upright: Scaling value, where the default size is 1
alt: Alt text for bridge image (see WP:ALT)
caption: Text for caption beneath image
coordinates: Latitude and longitude. Use {{Coord}}. A typical four-lane bridge (25 मी या 82.02 फीट wide) requires 0.1 second or 0.0001° of precision.
os_grid_reference: OS grid reference
carries: Type of vehicles bridge carries
crosses: Body of water or geographic feature that is being crossed
locale: General area where located (e.g. San Francisco, Indiana-Kentucky State Line)
official_name: Official name
other_name: Also known as name
named_for: namesake
owner: Persons or body that owns the bridge
maint: Maintaining entity (e.g. California Department of Transportation)
heritage: Heritage status (e.g. UK listed building)
id: ID number, if available
id_type: Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)
website: URL to the bridge's website; enclose within {{URL}}
preceded: Name of bridge upstream
followed: Name of bridge downstream
design: Type of bridge (cantilever, truss, suspension)
material: Construction material (concrete, steel, iron, stone, brick, wood)
material1: Construction material for trough
material2: Construction material for piers
length: Length of bridge, w/ conversions
width: Width of bridge, w/ conversions
height: Height of bridge, w/ conversions
depth: Depth of aqueduct channel, w/ conversions
traversable: Can standard craft (for that navigation) pass on the aqueduct? Yes/No
towpath: Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)
mainspan: Length of main span, w/ conversions
number_spans: Number of spans or arches
piers_in_water: Number of piers standing in a river or other water in normal conditions
load: Load limit of the bridge, w/ conversions
clearance_above: Clearance from the bridge deck to any part of the structure across the deck, if low enough to be problematic. Some bridges are clear above the deck.
clearance_below: Clearance beneath the bridge
life: Design life of the bridge in years
architect: Those responsible for the conceptual design of the bridge – to be used when engineering/construction design was done by another party
designer: Bridge designer/architect (e.g. Isambard Kingdom Brunel)
contracted_designer: The lead designer at the contract/post competition phase
winner: The winner/s of the design competition phase
engineering: The person or organization that did the engineering/construction design, where that differs from 'designer' above
builder: Construction company or bridge builder
fabricator: Steel fabricator
begin: Construction start date
complete: Construction end date
cost: Total project cost
open: Opening date, use {{Start date}}; If the bridge has yet not opened, use |opening=
inaugurated: the date the bridge is ceremonially opened
rebuilt: Date of major rebuild
collapsed: If collapsed, then date of collapse, don't use closed – closure is assumed
closed: Closing date
replaces: The bridge or ferry services that this bridge made redundant
replaced_by: The bridge or structure that replaced this bridge
traffic: Average Daily Traffic value
toll: Price of the toll (if a toll bridge)
map_type: The name of a locator map; see Template:Location_map#Available maps for a complete listing f options. This parameter is mutually exclusive with |map_image=.
map_relief: Whether to display a relief map with |map_type=; defaults to yes.
map_image: Filename of map image of bridge
map_dot_mark: Alternative marker (see template:location map)
map_alt: Alt text for map image (see WP:ALT)
map_caption: Caption for the locator or image map
extra: Spare field for modules, e.g. {{Infobox designation list}}

Map and coordinates

Use the coordinates= parameter with {{Coord}} to specify latitude and longitude. See the documentation for the Coord template for details on usage.

{{Infobox bridge
...
| coordinates   = <!-- {{Coord}} -->
| map_type            = <!-- Location name used for Template:Location map -->
| map_relief          = yes<!-- Use the relief map, if it exists -->
| map_alt             = <!-- Alternative text for map image, see WP:ALT for details -->
| map_caption         = <!-- Text to be displayed below map; for no caption enter "map_caption="; if the parameter is omitted then the caption will be "Marker text (location map name)" -->
...
}}

Example

{{Infobox bridge
| name        = Sydney Harbour Bridge
| image       = Sydney Harbour Bridge from Circular Quay.jpg
| carries     = Trains, Motor vehicles, pedestrians and bicycles
| crosses     = [[Port Jackson]]
| locale      = [[Sydney]], [[New South Wales]], Australia
| design      = [[Through arch bridge]]
| length      = {{Convert|1149|m|ft|0|abbr=on}}
| width       = {{Convert|49|m|ft|0|abbr=on}}
| height      = {{Convert|134|m|ft|0|abbr=on}}
| mainspan    = {{Convert|503|m|ft|0|abbr=on}}
| above       = (?)
| below       = {{Convert|49|m|ft|0|abbr=on}} at mid-span
| begin       = 28 July 1923
| complete    = 19 January 1932
| open        = {{Start-date|19 March 1932}}
| map_type    = Australia New South Wales
| map_relief  = yes
| coordinates = {{coord|33|51|8|S|151|12|38|E|region:AU-NSW_type:landmark|display = inline}}
}}

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter. A typical four-lane bridge (25 मी या 82.02 फीट wide) requires 0.1 second or 0.0001° of precision.

दे बा सं Buildings and structures infobox templates
Infobox building
Buildings	airport casino convention center desalination plant factory hospital hut library lighthouse museum observatory oil refinery power station prison religious building church monastery restaurant shopping mall station venue
Structures	aqueduct artwork¹ bridge type dam military installation monument military memorial pier pipeline power transmission line room telescope tunnel
¹ including statues.