टेम्पलेट:Infobox spring/doc

This template can be used to create an infobox for a spring, including geysers or hot springs.

Usage

{{{name}}}
{{{other_name}}}
[[File:{{{photo}}}|{{{photo_width}}}|alt={{{photo_alt}}}|upright=1.1]] {{{photo_caption}}}
Name origin	{{{name_origin}}}
Location	{{{location}}}
Coordinates	{{{coordinates}}}{{{coords_ref}}}
Spring source	{{{spring_source}}}
Elevation	{{{elevation}}}
Type	{{{hot_spring_type}}}
Provides water for	{{{provides}}}
Magnitude	{{{magnitude}}}
Eruption height	{{{height}}}
Frequency	{{{frequency}}}
Duration	{{{duration}}}
Flow	{{{flow}}}
Temperature	{{{temperature}}}
Depth	{{{depth}}}
Topo map	{{{topo}}}
[[File:{{{map_image}}}|{{{map_size}}}|alt={{{map_alt}}}]] {{{map_caption}}}
{{{embedded}}}

Without photo_width
[[File:{{{photo}}}|frameless|alt={{{photo_alt}}}|upright=1.1]] {{{photo_caption}}}

Commonly used		All parameters
{{Infobox spring | name = | photo = | photo_width = | photo_caption = | map = <!-- or | map_image = --> | map_width = | map_caption = | name_origin = | location = | elevation = | coordinates = | coords_ref = | hot_spring_type = | height = | duration = | frequency = | discharge = | temperature = | depth = }}		{{Infobox spring | name = | other_name = | photo = | photo_width = | photo_alt = | photo_caption = | map = <!-- or | map_image = --> | relief = | map_width = | map_alt = | map_caption = | mark = | mark_width = | label = | label_position = | name_origin = | location = | spring_source = | elevation = | coordinates = | coords_ref = | hot_spring_type = | type = | provides = | magnitude = | height = | duration = | frequency = | discharge = | temperature = | depth = | child = | embedded = }}

Parameter descriptions

Parameter	Description
name	Required. Official name of the geothermal feature (e.g. Old Faithful Geyser)
other_name	If the feature is also commonly known by another name then use this parameter for the alternate name.
photo	The name of an image file to be displayed. No special formatting is needed. For geysers, a photo of the eruption is preferred.
photo_width	The image width in pixels. If specified, the maximum width is 280px. If not specified, the image uses frameless with upright=1.1 which displays it at approximately 110% of the user's default thumbnail size (for most users the image will display at 240px; for logged-in users who have changed the setting at Special:Preferences the displayed image could range from 130px to 440px). See also: Module:InfoboxImage, WP:AUTOSIZE, WP:EIS, WP:IMGSIZE, and .
photo_alt	Alternate text for the photo for visually impaired readers. See WP:ALT.
photo_caption	The caption that will display bellow the image. Include month and year of picture, if known.
map	The name of the location map to be displayed. See Map display methods below. To use a static image, use |map_image=
map_image	The file name of a static map image to be displayed. To use a location map, use |map=.
map_relief	When the geographical coordinates method is used (see Map display methods), any non-blank value (map_relief=yes, map_relief=1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
map_size or map_width	Width to display the map image in pixels. The default and maximum is 220. For example, map_width=200 (not map_px).
map_alt	Alternative text for the map image, see WP:ALT.
map_caption	Text displayed below the map image, if required.
mark	The image to use for the marker. The default is Red pog.svg. See Template:Location map for more information.
marker_width	The display width of the marker image in pixels. Default = 8.
label	Text that will be displayed next to the marker. Works with label_position below.
label_position	Specifies the position of a label with respect to the marker. Valid values are left, right, top, bottom and none. See label above.
Coordinate related parameters
coordinates	Can be used with {{coord}} template to display geographical coordinates and a pushpin on an optional map.
coords_ref	Used with <ref>...</ref> tags to cite a references.
Other parameters
name_origin	Where did the name of this feature originate? Who named this feature?
location	Location of the feature. The specific location of the geyser first, followed by the general region. For well known geyser regions, use the local group or basin (e.g., Lower Geyser Basin, Yellowstone National Park).
spring_source	Source for the water for the spring.
elevation	The elevation of the feature (don't forget to include both feet and meters).
hot_spring_type	The type of geothermal features. Possible options are geyser, fumarole, mud pot or hot spring. Geysers can be cone or fountain geysers. For non-geothermal springs, use type
type	The type of spring. Possible options are. For geothermal springs, use hot_spring_type
provides	Body of water into which the spring discharges.
height	For geysers, the minimum to maximum height of an eruption (e.g. - 15 - 20 minutes)
duration	For geysers, the minimum to maximum duration of an eruption
frequency	For geysers, the average frequency of an eruption
discharge	Water discharge for a geyser or a flowing spring
magnitude	The magnitude of the discharge as measured by the spring classification scale
temperature	For pools, the average temperature of the water in degrees Fahrenheit and Celsius
depth	For pools, the average depth of the feature
child	Used to embed this template in another. See below.
embedded	Used to embed another template in this one. See below.

Map display methods

This template uses Template:Location map. For more details, see the documentation for that template.

Simple map image method

Any map image can be displayed by specifying the name of the image file. Notice that when a photo and a map are specified the map will appear at the bottom of the infobox and that if no photo is specified the map will be displayed at the top.

Daisy Geyser
Daisy Geyser during an eruption
Name origin	Hague Geological Surveys, 1880s
Location	Upper Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Coordinates	44°28′12″N 110°50′42″W
Elevation	7,329 फीट (2,234 मी)
Temperature	84.5 °C (184.1 °F)
Map of Upper Geyser Basin

{{Infobox spring
| name = Daisy Geyser
| photo = Daisy Geyser erupting in Yellowstone National Park edit.jpg
| photo_width = <!-- omitted to display at user's default size -->
| photo_caption = Daisy Geyser during an eruption
| map_image = NorthernSectionUpperGeyserBasin-Daisy.jpg
| map_caption = Map of Upper Geyser Basin
| map_size = 200
| name_origin = Hague Geological Surveys, 1880s
| location = Upper Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|28|12|N|110|50|42|W|display=inline}}
| coords_ref = 
| elevation = {{convert|7329|ft|0}}
| temperature = 84.5 °C (184.1 °F) 
}}

Big Cone
Big Cone Geyser
Location	West Thumb Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Coordinates	44°25′03″N 110°34′14″W
Elevation	7,864 फीट (2,396.9 मी)
West Thumb Geyser Basin

{{Infobox spring
| name = Big Cone
| photo = Big cone.jpg
| photo_width = 400px <!-- if a size in pixels is specified, the image will not display any larger than 280px -->
| photo_caption = Big Cone Geyser
| map_image = WestThumbGeyserBasin-Big Cone.jpg
| map_caption = West Thumb Geyser Basin
| map_alt = Map shows Big Cone is in the West Thumb Geyser Basin.
| map_size = 
| location = West Thumb Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|25|03|N|110|34|14|W|type:landmark_region:US-WY}}
| coords_ref = 
| elevation = {{convert|7864|ft|m|1}}
}}

Geographical coordinate method

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark, the geographic coordinates must be specified using the {{Coord}} template. See the documentation for {{Location map}}. The parameters for this template correspond with a subset of the parameters for Template:Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Module:Location map/data/Canada Alberta. In this case specify map=Canada Alberta or, in this case, map=Alberta. The following example does not produce output that is optimum for use with the geysers of Yellowstone but demonstrates the method.

Big Alcove Spring
Big Alcove Spring Location of Big Alcove Spring in Wyoming
Coordinates	44°43′8″N 110°42′24″W

{{Infobox spring
| name = Big Alcove Spring
| map = USA Wyoming
| map_alt = Big Alcove Spring is located in the northwestern Wyoming
| map_caption = Location of Big Alcove Spring in Wyoming
| map_width = 200
| label = Big Alcove Spring
| coordinates = {{coord|44|43|8|N|110|42|24|W|region:US-WY|display=inline <!-- just to be tidy -->}}
}}

The label is optional. By default it is usually displayed to the left of the mark.

Template embedding

This template can be embedding in another infobox template by adding the code |child=yes. To embed another template in this one use |embedded={{Infobox ....

Microformats

The articles created using this template include an hCard microformat. For more information read this.

Tracking category

• श्रेणी:Pages using infobox spring with unknown parameters (0)