टेम्पलेट:Convert
See this information on copying this template and modifying it for use on another wiki. |
This template uses Lua: |
Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:
{{convert|2|km|mi}}
→ 2 किलोमीटर (1.2 मील){{convert|7|mi|km}}
→ 7 मील (11 किमी)
Units to convert
संपादन करींEnter units to convert:
{{convert|1|lb|kg}}
→ 1 पाउंड (0.45 किग्रा)
- Units are listed below.
Unit name or symbol (abbreviation): 1 pound or 1 lb?
संपादन करींBy default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off
to change this behaviour:
{{convert|1|lb|kg}}
→ 1 पाउंड (0.45 किग्रा)
To abbreviate both:
{{convert|1|lb|kg|abbr=on}}
→ 1 पाउंड (0.45 किग्रा){{convert|1|lb|kg|abbr=off}}
→ 1 पाउंड (0.45 किलोग्राम)
|abbr=in
is the reverse behaviour to the default, |abbr=out
:
{{convert|1|lb|kg|abbr=in}}
→ 1 पाउंड (0.45 किलोग्राम)
When using scientific notation, the default is for the second (converted) value to display with scientific notation:
{{convert|100|e6mi|e6km}}
→ 100 मिलियन मील (160×10 6 किमी)
To display thousands, millions, etc., while abbreviating both input and output units use |abbr=unit
:
{{convert|100|e6mi|e6km|abbr=unit}}
→ 100 मिलियन मील (160 मिलियन किमी)
Convenience: {{cvt}} has |abbr=on
by default
संपादन करीं
Template {{cvt}} is similar to {{convert}}, but has |abbr=on
as the default behaviour. In {{cvt}}, all other options are available. So:
{{cvt|1|lb|kg}}
→ 1 पाउंड (0.45 किग्रा)
is equal to:
{{convert|1|lb|kg|abbr=on}}
→ 1 पाउंड (0.45 किग्रा)
Adjective: a 10-mile distance
संपादन करींUse |adj=on
to produce the adjective form:
A {{convert|10|mi|km|adj=on}} distance
→ A 10-मील (16 किमी) distance.
Default behaviour, for comparison:
{{convert|10|mi|km}} to go
→ 10 मील (16 किमी) to go.
This option does not work with |abbr=on
.
Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?
संपादन करींBy definition, 100 ft equals 30.48 मी. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.
Default rounding
संपादन करींBy {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).
Examples of rounding | ||
---|---|---|
Input | Displays as | Note |
{{convert|123|ft|m|-1}} |
123 फीट (40 मी) | |
{{convert|123|ft|m}} |
123 फीट (37 मी) | same output as with 0 (below) |
{{convert|123|ft|m|0}} |
123 फीट (37 मी) | |
{{convert|123|ft|m|1}} |
123 फीट (37.5 मी) | |
{{convert|123|ft|m|2}} |
123 फीट (37.49 मी) | exact value is 37.4904 m |
{{convert|500|ft|m|-1}} |
500 फीट (150 मी) | |
{{convert|500|ft|m}} |
500 फीट (150 मी) | same output as with -1 (above) |
{{convert|500|ft|m|0}} |
500 फीट (152 मी) | |
{{convert|500|ft|m|1}} |
500 फीट (152.4 मी) | |
{{convert|500|ft|m|2}} |
500 फीट (152.40 मी) | exact value is 152.4 m |
Convert supports four types of rounding:
Round to a given precision: use a precision number
संपादन करींSpecify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.
Round to a given number of significant figures: |sigfig=
संपादन करीं
To specify the output number to be with n significant figures use |sigfig=<number>
:
{{convert|1200|ft|m|sigfig=4}}
→ 1,200 फीट (365.8 मी){{convert|1200|ft|m|sigfig=3}}
→ 1,200 फीट (366 मी){{convert|1200|ft|m|sigfig=2}}
→ 1,200 फीट (370 मी){{convert|1200|ft|m|sigfig=1}}
→ 1,200 फीट (400 मी)
Default behaviour, for comparison:
{{convert|1200|ft|m}}
→ 1,200 फीट (370 मी)
Setting |sigfig=
is meaningless
{{convert|1200|ft|m|sigfig=0}}
→ 1,200 फीट (370 मी)*
Round to a multiple of 5: 15, 20, 25, ...
संपादन करींUsing |round=5
rounds the outcome to a multiple of 5.
{{convert|10|m|ft}}
→ 10 मीटर (33 फीट){{convert|10|m|ft|round=5}}
→ 10 मीटर (35 फीट)
Similar: using |round=25
rounds the outcome to a multiple of 25.
{{convert|10|m|ft}}
→ 10 मीटर (33 फीट){{convert|10|m|ft|round=25}}
→ 10 मीटर (25 फीट)
Default behaviour, for comparison:
{{convert|10|m|ft|sigfig=4}}
→ 10 मीटर (32.81 फीट)
In a range, one can round each value individually to the default. Use |round=each
:
{{convert|10 x 200 x 3000|m|ft}}
→ 10 बाई 200 बाई 3,000 मीटर (33 बाई 656 बाई 9,843 फीट){{convert|10 x 200 x 3000|m|ft|round=each}}
→ 10 बाई 200 बाई 3,000 मीटर (33 बाई 660 बाई 9,800 फीट)
Round to a multiple of a given fraction: 2 3⁄16 inch
संपादन करींSpecify the desired denominator using |frac=<some positive integer>
. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).
{{convert|5.56|cm|in|frac=16}}
→ 5.56 सेंटीमीटर (2 3⁄16 इंच){{convert|8|cm|in|frac=4}}
→ 8 सेंटीमीटर (3 1⁄4 इंच)
The fraction is reduced when possible:
{{convert|8|cm|in|frac=100}}
→ 8 सेंटीमीटर (3 3⁄20 इंच)
Default behaviour, for comparison:
{{convert|8|cm|in}}
→ 8 सेंटीमीटर (3.150 इंच)
Rounding temperatures: °C, °F and K
संपादन करींIn temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.
{{convert|10,000|C|F K}}
→ 10,000 °C (18,000 °F; 10,300 K){{convert|10,000.1|C|F K}}
→ 10,000.1 °C (18,032.2 °F; 10,273.2 K){{convert|-272|C|F K}}
→ −272 °C (−457.60 °F; 1.15 K){{convert|-272|C}}
→ −272 °C (−457.60 °F){{convert|-300|C|F K}}
→ −300 °C (−508.0 °F; −26.9 K){{convert|0|C|F K}}
→ 0 °C (32 °F; 273 K)
The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow.
Result (1) seems off until you set the significant figures yourself with |sigfig=
:
{{convert|10000|C|sigfig=5}}
→ 10,000 °C (18,032 °F)
or you set the precision positionally, relative to the decimal point (zero being at the decimal point):
{{convert|10000|C|0}}
→ 10,000 °C (18,032 °F)
The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.
Into multiple units: 10 °C (50 °F; 283 K)
संपादन करींSeparate the multiple output units by a space:
{{convert|10|C|F K}}
→ 10 °C (50 °F; 283 K){{convert|5|km|mi nmi}}
→ 5 किलोमीटर (3.1 मील; 2.7 समु-मील)
If the output unit names contain spaces, use +
as the separator.
See also:
- For multiple-unit options like 1 ft 5 in, see #In input and #In output.
Ranges of values
संपादन करींA range converts two values and separates them by your choice of words and punctuation.
A range: 6 to 17 kg (13 to 37 lb)
संपादन करींRange indicators are entered as the second parameter (between the values). Range separators can be:
Range separators in {{convert}} | |||
---|---|---|---|
Separator | Convert | Result | Notes |
-
|
{{convert|3|-|6|ft}}
|
3–6 फीट (0.91–1.83 मी) | Input can be hyphen (-) or en dash (–), output uses en dash |
– – (en dash)
|
{{convert|3|–|6|ft}}
|
3–6 फीट (0.91–1.83 मी) | |
and
|
{{convert|3|and|6|ft}}
|
3 आ 6 फीट (0.91 आ 1.83 मी) | |
&
|
{{convert|3|&|6|ft}}
|
3 &[convert: unknown unit] | Same as and
|
and(-)
|
{{convert|3|and(-)|6|ft}}
|
3 आ 6 फीट (0.91–1.83 मी) | |abbr=on abbreviates the first unit
|
and(-)|abbr=on
|
{{convert|3|and(-)|6|ft|abbr=on}}
|
3 आ 6 फीट (0.91–1.83 मी) | |
or
|
{{convert|3|or|6|ft}}
|
3 या 6 फीट (0.91 या 1.83 मी) | |
to
|
{{convert|3|to|6|ft}}
|
3 से 6 फीट (0.91 से 1.83 मी) | |
to(-)
|
{{convert|3|to(-)|6|ft}}
|
3 से 6 फीट (0.91–1.83 मी) | |abbr=on abbreviates the first unit
|
to(-)|abbr=on
|
{{convert|3|to(-)|6|ft|abbr=on}}
|
3 से 6 फीट (0.91–1.83 मी) | |
to about
|
{{convert|3|to about|6|ft}}
|
3 to about 6 फीट (0.91 to about 1.83 मी) | |
+/-
|
{{convert|3|+/-|6|ft}}
|
3 ± 6 फीट (0.91 ± 1.83 मी) | |
± ±
|
{{convert|3|±|6|ft}}
|
3 ± 6 फीट (0.91 ± 1.83 मी) | |
+
|
{{convert|3|+|6|ft}}
|
3 + 6 फीट (0.91 + 1.83 मी) | |
,
|
{{convert|3|,|6|ft}}
|
3, 6 फीट (0.91, 1.83 मी) | |
, and
|
{{convert|3|, and|6|ft}}
|
3, आ 6 फीट (0.91, आ 1.83 मी) | |
, or
|
{{convert|3|, or|6|ft}}
|
3, या 6 फीट (0.91, या 1.83 मी) | |
by
|
{{convert|3|by|6|ft}}
|
3 बाई 6 फीट (0.91 बाई 1.83 मी) | |
x
|
{{convert|3|x|6|ft}}
|
3 बाई 6 फीट (0.91 मी × 1.83 मी) | Scientific notation.|abbr=on abbreviates the first unit
|
× ×
|
{{convert|3|×|6|ft}}
|
3 बाई 6 फीट (0.91 मी × 1.83 मी) | |
x|abbr=on
|
{{convert|3|x|6|ft|abbr=on}}
|
3 बाई 6 फीट (0.91 मी × 1.83 मी) | |
xx
|
|xx| is deprecated. Use |x| instead | ||
*
|
|*| is deprecated. Use |x| instead | ||
to-
|
|to-| is deprecated. Use |to(-)| instead | ||
&
|
|&| is deprecated. Use |and| instead | ||
abbr=mos
|
|abbr=mos is deprecated. Use |x| or |by| instead |
Multiple dimensions: 6 मी × 12 मी (20 बाई 39 फीट)
संपादन करींUse by
:
{{convert|6|by|12|ft|m}}
→ 6 बाई 12 फीट (1.8 बाई 3.7 मी)
Use ×
, multiplication sign, or x
, letter:
{{convert|6|x|12|m|ft}}
→ 6 बाई 12 मीटर (20 बाई 39 फीट)
In science, the formal way is to set |x|
and |abbr=on
(keeping dimensions right, like in area = x km2):
{{convert|6|x|12|m|ft|abbr=on}}
→ 6 मी × 12 मी (20 बाई 39 फीट)
About feet, inch in ranges and multiples
संपादन करींWhile it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:
{{convert|1|ft|3|in|x|3|ft|5|in|mm}}
→ 1 फुट 3 इंच ([convert: unknown unit])
Default behaviour, for comparison:
{{convert|1|ft|3|in|mm}}
→ 1 फुट 3 इंच (380 मिमी)
Words
संपादन करींSpelling of unit name: UK metre or US meter?
संपादन करींDefault spelling of units is en-UK. To show en-US spelling, use |sp=us
:
{{convert|1|m|ft}}
→ 1 मीटर (3.3 फीट)—default{{convert|1|m|ft|sp=us}}
→ 1 मीटर (3.3 फीट)
Spell out numbers: ten miles
संपादन करींTo write a number in words, use |spell=in
:
{{convert|10|mi|m|spell=in}}
→ ten मील (16,000 मी)
To spell out both in and out values, use |spell=on
:
{{convert|10|mi|m|spell=on}}
→ ten मील (sixteen thousand मीटर)
To make first letter a capital, use |spell=In
, |spell=On
{{convert|10|mi|m|spell=In}}
→ Ten मील (16,000 मी){{convert|10|mi|m|spell=On}}
→ Ten मील (sixteen thousand मीटर)
Remember that the spelling of the units (ft, m) is independently set by |abbr=
. To the extreme:
{{convert|10|mi|m|spell=on|abbr=off|sp=us}}
→ ten मील (sixteen thousand मीटर)
Inserted before units: 4 planted acres
संपादन करीं{{convert|4|acre||adj=pre|planted}}
→ 4 planted एकड़ (1.6 हे)
disp=preunit
is similar, but has no separator after the specified text, and can have different text for the output value:
{{convert|4|acre||disp=preunit|planted }}
→ 4 planted एकड़ (1.6 planted हे){{convert|4|acre||disp=preunit|planted |reforested-}}
→ 4 planted एकड़ (1.6 reforested-हे)
After adjective unit: A 10-फुट-long corridor
संपादन करीं{{convert|10|ft|m|adj=mid|-long}}
→ 10-फुट-long (3.0 मी)
Plurals: 1 inch, 2 inches
संपादन करींThe unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.
{{convert|1|metre}}
→ 1 मीटर (3 फुट 3 इंच){{convert|2|metre}}
→ 2 मीटर (6 फुट 7 इंच){{convert|2|metre|abbr=on}}
→ 2 मी (6 फुट 7 इंच)
- Exception
Entering the unit spelled |foot|
forces singular output "foot", whatever the number is.
{{convert|100|foot|abbr=off}}
→ 100 फुट (30 मीटर)
Fractions: one-eighth of an imperial pint
संपादन करींThe convert template also supports spelling out fractions.
{{convert|1/4|oz|g|spell=in}}
→ one-quarter औंस (7.1 ग्रा)
Any additional words needed for the fraction can also be added at the end of the template.
{{convert|1/8|imppt|mL|spell=in|adj=pre|of an}}
→ one-eighth of an imperial pint (71 मिलि)
Numbers
संपादन करींUsing an SI prefix: gigameter (Gm), or micrometer (μm)
संपादन करींMetric prefixes | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Units can have an SI prefix like G
before the unit: Gm
, and giga
before the name: gigameter
. These are plain multiplication factors.
To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:
- 12 गीगामी (1.2×1010 मी)
- 12 µमी (1.2×10−5 मी)
The prefix can be added before the SI unit (here: unit m
for meter):
{{convert|12|Gm|mi|abbr=on}}
→ 12 गीगामी (7,500,000 मील)Mm
: 12 मेगामी (7,500 मील)km
: 12 किमी (39,000 फीट)mm
: 12 मिमी (0.47 इंच)μm
: 12 µमी (0.012 मिमी)um
: 12 µमी (0.012 मिमी) (letter "u" can be used for "μ" here)
The prefix can be used in the output unit:
{{convert|12000|mi|Mm|abbr=on}}
→ 12,000 मील (19 मेगामी){{convert|12|in|μm|abbr=on}}
→ 12 इंच (300,000 µमी)
As an exception, the non-SI unit "inch" can have the "μ" prefix too)
{{convert|12|μm|μin|abbr=on}}
→ 12 µमी (470 µin)
Engineering notation: 7 × 106 m
संपादन करींIn the unit: e6m
संपादन करींEngineering number notations like 7E6 (for 7 × 106) can be entered as a "prefix" to the unit:
{{convert|7|e6m}}
→ 7 मिलियन मीटर (23,000,000 फीट)
The same is possible for the output unit:
{{convert|23,000,000|ft|e6m}}
→ 23,000,000 फीट (7.0×10 6 मी)
Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:
e3
(thousand),e6
(million),e9
(billion),e12
(trillion),e15
(quadrillion).
Scientific notation: 1.23×10−14
संपादन करींIn scientific notation, a number is written like 1.23×10−14. The plain number has exactly one digit before the decimal point.
With {{convert}}, the input can be in e-notation such as 12.3e4
. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.
{{convert|12.3e-15|atm|atm|abbr=on}}
→ 12.3×10−15 atm (1.23×10−14 atm){{convert|0.00000005|atm|atm|abbr=on}}
→ 0.00000005 atm (5.0×10−8 atm)
Input with fractions: 1 1⁄2 इंच (38.1 मिमी)
संपादन करींThe number to convert can be written in fractions. Both /
(keyboard slash) and ⁄
(fraction slash) are accepted:
{{convert|1/2|in|mm|1}}
→ 1⁄2 इंच (12.7 मिमी){{convert|1⁄2|in|mm|1}}
→ 1⁄2 इंच (12.7 मिमी)
With integers, use a +
sign
{{convert|2+1⁄2|in|mm|1}}
→ 2 1⁄2 इंच (63.5 मिमी)
When negative, use a hyphen -
and repeat it:
{{convert|-2-1⁄2|in|mm|1}}
→ −2 1⁄2 इंच (−63.5 मिमी){{convert|2-1⁄2|in|mm|1}}
→ 2–1⁄2 इंच (50.8–12.7 मिमी) Note: this is read as a range{{convert|-2+1⁄2|in|mm|1}}
→ [convert: invalid number] Should be a number, not an expression (do not require a calculation)
Output with horizontal fraction bar in: 1/2 inch
संपादन करींUsing a double slash (//
) returns a horizontal bar fraction:
{{convert|1//2|in|mm|1}}
→ 1/2 इंच (12.7 मिमी){{convert|2+1//2|in|mm|1}}
→ 2 1/2 इंच (63.5 मिमी)
Thousands separator: 1,000 mi or 1000 mi
संपादन करींIn input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:
{{convert|1234567|m|ft}}
→ 1,234,567 मीटर (4,050,417 फीट){{convert|1,234,567|m|ft}}
→ 1,234,567 मीटर (4,050,417 फीट){{convert|1 234 567|m|ft}}
→ [convert: invalid number]
Set |comma=off
to remove the separator from the output:
{{convert|1234567|m|ft|comma=off}}
→ 1234567 मीटर (4050417 फीट)
Use |comma=gaps
to use digit grouping by gap (thin space) as a thousands separator:
{{convert|1234567|m|ft|comma=gaps}}
→ 1234567 मीटर (4050417 फीट)
Default behaviour, for comparison:
{{convert|1234567|m|ft}}
→ 1,234,567 मीटर (4,050,417 फीट)
Setting |comma=5
or |comma=gaps5
will only add the separator when the number of digits is 5 or more:
{{convert|1234|m|ft|comma=5}}
→ 1234 मीटर (4049 फीट){{convert|1234567|m|ft|comma=5}}
→ 1,234,567 मीटर (4,050,417 फीट){{convert|1234|m|ft|comma=gaps5}}
→ 1234 मीटर (4049 फीट)*{{convert|1234567|m|ft|comma=gaps5}}
→ 1234567 मीटर (4050417 फीट)*
Default behaviour, for comparison:
{{convert|1234|m|ft}}
→ 1,234 मीटर (4,049 फीट)
Output manipulation
संपादन करींBrackets and separators: 10 m [33 ft]
संपादन करींPunctuation that distinguishes the two measurements is set by |disp=
.
Options are: b
(the default), sqbr
, comma
, or
, br
, x|…
:
{{convert|10|m|ft|disp=sqbr}}
→ 10 मीटर [33 फीट]{{convert|10|m|ft|disp=comma}}
→ 10 मीटर, 33 फीट{{convert|10|m|ft|disp=or}}
→ 10 मीटर या 33 फीट
Default behaviour, for comparison:
{{convert|10|m|ft}}
→ 10 मीटर (33 फीट)
Setting |disp=br
will force a new line (<br/>
)
{{convert|10|m|ft|disp=br}}
→ 10 मीटर
33 फीट
Also |disp=br()
will force a new line, and keep the brackets:
{{convert|10|m|ft|disp=br()}}
→ 10 मीटर
(33 फीट)
Setting |disp=x|…
allows any text as separator:
{{convert|10|m|ft|disp=x|_MyText_}}
→ 10 मीटर_MyText_33 फीट—(To display spaces, use
)
Flipping (reordering) the two measurements: 1,609.3 मीटर (1 मील)
संपादन करींSetting |order=flip
will flip (swap) the two measurements:
{{convert|1|mi|m|order=flip}}
→ 1,609.3 मीटर (1 मील)
Default behaviour, for comparison:
{{convert|1|mi|m}}
→ 1 मील (1,609.3 मीटर)
When converting to multiple units, the effect is:
{{convert|10|km|mi nmi|order=flip}}
→ 6.2137 मील; 5.3996 समुंद्री मील (10 किलोमीटर){{convert|10|km|nmi mi|order=flip}}
→ 5.3996 समुंद्री मील; 6.2137 मील (10 किलोमीटर)
Displaying parts of the result: 2 (1.5)
संपादन करींIt is possible to display only parts of the conversion result:
Convert | Output | Description |
---|---|---|
{{convert|2|cuyd|m3}} |
2 घन गज (1.5 मी3) | Default behaviour, for comparison |
{{convert|2|cuyd|m3|abbr=values}}
|
2 (1.5) | Input and output numbers |
{{convert|2|cuyd|m3|disp=unit}} |
घन गज | Input unit |
{{convert|2|cuyd|m3|disp=unit|adj=on}} |
घन-गज | Input unit, adjective (hyphenated) |
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}} |
2 घन गज | Input (workaround) |
{{convert|2|cuyd|m3|abbr=~}} |
2 घन गज [घन गज] (1.5 मी3) | Input: both name and symbol |
{{convert|2|cuyd|m3|disp=unit2}} |
मी3 | Output unit (symbol) |
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} |
घन मीटर | Output unit (name) |
{{convert|2|cuyd|m3|disp=number}} |
1.5 | Output value |
{{convert|2|cuyd|m3|disp=out}} |
1.5 मी3 | Output value and unit |
{{convert|2|cuyd|m3|disp=out|abbr=off}} |
1.5 घन मीटर | Output value and unit |
Display both input name and symbol: 2 kilopascals [kPa]
संपादन करींSetting |abbr=~
returns both name and symbol of the first (input) unit:
{{convert|2|kPa|psi|abbr=~}}
→ 2 किलोपास्कल [किपास्कल] (0.29 psi)A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure
→ A 2-किलोपास्कल [किपास्कल] (0.29 psi) pressure
Table options
संपादन करींFor the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.
Enforced line break
संपादन करीं|disp=br
adds a line-break and omits brackets.
|disp=br()
adds a line-break and does add brackets to the converted value. This may be useful in tables:
|disp=br |
|disp=br()
|
---|---|
100 किलोमीटर 62 मील |
100 किलोमीटर (62 मील) |
Table columns showing numbers only
संपादन करींUsing {convert} in a table cell, with |disp=table
splits the result over two columns:
{{convert|10|m|ft|disp=table}}
→style="text-align:right;"|10
|style="text-align:right;"|33
|disp=tablecen
does the same, and also centers the text:
{{convert|20|m|ft|disp=tablecen}}
→style="text-align:center;"|20
|style="text-align:center;"|66
The units are added as a column header:
m ft |disp=table
10 33 |disp=tablecen
20 66 |disp=<other>
(default)30 मीटर (98 फीट)
Sorting
संपादन करींUse |sortable=on
to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:
{{convert|10|m|ft|sortable=on}}
→ <span style="display:none">7001100000000000000</span>10 metres (33 ft)
Use both |disp=table
and |sortable=on
together to produce table columns (pipe symbols) for each value in sortable columns:
m ft A 15 3⁄4 52 B 15.5 51 C 16.0 52.5 D 16 52
The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.
Units
संपादन करींAll units
संपादन करींThe table below lists units supported by template {{convert}}. The list is not complete—more complete lists are linked for each dimension. A complete list is at the full list of units.
- Explanation - unit codes
The {{convert}} template uses unit-codes, which are similar to (but not necessarily exactly the same as) the usual written abbreviation for a given unit. These 'unit-codes' are given in column 3 of the following tables, and are accepted as input by the {{convert}} template as the second and third unnamed parameters. For example, {{convert|100|kg|lb}}
produces "100 किलोग्राम (220 पाउंड)" and {{convert|100|lb|kg}}
produces "100 पाउंड (45 किग्रा)"
Some units have alternative unit-codes; these are shown in brackets in column 3, e.g. °F (F): either may be entered for Fahrenheit (but not lower-case f).
The unit-codes should be treated as case-sensitive, especially in cases like {{convert|100|Mm|mm}}
, which produces "100 मेगामीटर (1.0×1011 मिमी)".
The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the | separator). Typical combination output units are listed below in column 7. For example, {{convert|55|nmi|km mi}}
produces "55 समुंद्री मील (102 किमी; 63 मील)", and {{convert|1|oz|ozt g gr}}
produces "1 औंस (0.91 ozt; 28 ग्रा; 440 ग्रे)".
Abridged list of units supported by {{Convert}} | |||||||
---|---|---|---|---|---|---|---|
ब्याख्या | |||||||
सिस्टम | इकाई | इकाई- कोड |
चीन्हा भा छोटरूप. |
नोट | डिफॉल्ट बदलाव नमूना |
कंबीनेशन आउटपुट इकाई | |
the system(s) to which the unit belongs | units listed by name | unit-code to use in template | symbols shown in output | other notes about the units | sample of the default conversion for the unit | output codes for multiple conversions
| |
AREA (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | वर्ग किलोमीटर | km2 | किमी2 | US spelling: square kilometer |
1.0 किमी2 (11,000,000 वर्ग फु) |
| |
वर्ग मीटर | m2 | मी2 | US spelling: square meter |
1.0 मी2 (11 वर्ग फु) |
| ||
वर्ग सेंटीमीटर | cm2 | सेमी2 | US spelling: square centimeter |
1.0 सेमी2 (0.0011 वर्ग फु) |
| ||
वर्ग मिलीमीटर | mm2 | मिमी2 | US spelling: square millimeter |
1.0 मिमी2 (1.1×10−5 वर्ग फु) |
| ||
non-SI metric | हेक्टेयर | ha | हे | 1.0 हे (2.5 एकड़) | |||
Imperial & US customary |
वर्ग मील | sqmi | वर्ग मील | 1.0 वर्ग मील (2.6 किमी2) |
| ||
एकड़ | acre | (none) | 1.0 एकड़ (0.40 हे) | ||||
वर्ग गज | sqyd | वर्ग गज | 1.0 वर्ग गज (0.84 मी2) | ||||
वर्ग फुट | sqft (sqfoot) |
वर्ग फु | long code "sqfoot" outputs square foot (and never feet) | 1.0 वर्ग फु (0.093 मी2) |
| ||
वर्ग इंच | sqin | वर्ग इंच | 1.0 वर्ग इंच (6.5 सेमी2) |
| |||
Other | वर्ग समुंद्री मील | sqnmi | वर्ग समु.मी | 1.0 वर्ग समु.मी (3.4 किमी2; 1.3 वर्ग मील) | |||
dunam | dunam | (none) | For alternative spellings and definitions see the full list | 1.0 dunam (0.0010 किमी2; 0.00039 वर्ग मील) | |||
tsubo | tsubo | (none) | 1.0 tsubo (3.3 मी2) |
| |||
DENSITY (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
Metric | किलोग्राम प्रति घनमीटर | kg/m3 | किग्रा/मी3 | 1.0 किग्रा/मी3 (1.7 lb/cu yd) |
| ||
ग्राम per घन मीटर | g/m3 | ग्रा/मी3 | 1.0 ग्रा/मी3 (0.0017 lb/cu yd) |
| |||
Imperial & US customary |
पाउंड प्रति घनफुट | lb/ft3 | lb/cu ft | 1.0 lb/cu ft (0.016 ग्रा/सेमी3) |
| ||
पाउंड प्रति घन गज | lb/yd3 | lb/cu yd | 1.0 lb/cu yd (0.59 किग्रा/मी3) |
| |||
ENERGY (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | गीगाजूल | GJ | (none) | 1.0 गीगाजूल (240,000,000 cal) | |||
मेगाजूल | MJ | (none) | 1.0 मेगाजूल (240,000 cal) | ||||
किलोजूल | kJ | (none) | 1.0 किलोजूल (240 cal) | ||||
हेक्टोजूल | hJ | (none) | 1.0 हेक्टोजूल (24 cal) | ||||
डेकाजूल | daJ | (none) | 1.0 डेकाजूल (2.4 cal) | ||||
जूल | J | (none) | 1.0 जूल (0.24 cal) | ||||
डेसीजूल | dJ | (none) | 1.0 डेसीजूल (0.024 cal) | ||||
सेंटीजूल | cJ | (none) | 1.0 सेंटीजूल (0.0024 cal) | ||||
मिलीजूल | mJ | (none) | 1.0 मिलीजूल (0.00024 cal) | ||||
माइक्रोजूल | µJ (uJ) | (none) | 1.0 माइक्रोजूल (2.4×10−7 cal) | ||||
नैनोजूल | nJ | (none) | 1.0 नैनोजूल (2.4×10−10 cal) | ||||
cgs | megaerg | Merg | Merg | 1.0 Merg (0.10 जूल) | |||
kiloerg | kerg | kerg | 1.0 kerg (0.10 मिलीजूल) | ||||
erg | erg | (none) | 1.0 erg (0.10 माइक्रोजूल) | ||||
Watt-hour multiples | terawatt-hour | TWh | TWh | 1.0 TWh (3.6 पेटाजूल) | |||
TW.h | TW·h | ||||||
गीगावाट-घंटा | GWh | GWh | 1.0 GWh (3.6 टेराजूल) | ||||
GW.h | GW·h | ||||||
megawatt-hour | MWh | MWh | 1.0 MWh (3.6 गीगाजूल) | ||||
MW.h | MW·h | ||||||
kilowatt-hour | kWh | kWh | 1.0 kWh (3.6 मेगाजूल) | ||||
kW.h | kW·h | ||||||
watt-hour | Wh | Wh | 1.0 Wh (3.6 किलोजूल) | ||||
W.h | W·h | ||||||
Electron- volt multiples | |||||||
gigaelectronvolt | GeV | GeV | 1.0 GeV (0.16 नैनोजूल) | ||||
megaelectronvolt | MeV | MeV | 1.0 MeV (0.16 पिकोजूल) | ||||
kiloelectronvolt | keV | keV | 1.0 keV (0.16 फेम्टोजूल) | ||||
electronvolt | eV | eV | 1.0 eV (0.16 एट्टोजूल) | ||||
millielectronvolt | meV | meV | 1.0 meV (0.16 जेप्टोजूल) | ||||
Calorie multiples | कैलोरी | Cal | Cal | The thermo-chemical calorie is the default definition. For others, see the full list. | 1.0 Cal (4.2 किलोजूल) | ||
megacalorie | Mcal | Mcal | 1.0 Mcal (4.2 मेगाजूल) | ||||
किलोकैलोरी | kcal | (none) | 1.0 किलोकैलोरी (4.2 किलोजूल) | ||||
कैलोरी | cal | cal | 1.0 cal (4.2 जूल) | ||||
millicalorie | mcal | mcal | 1.0 mcal (4.2 मिलीजूल) | ||||
pound/ ounce-foot/ inch-hour-minute-second |
foot-poundal | ftpdl | ft·pdl | 1.0 ft·pdl (0.042 जूल) | |||
फुट-पाउंड बल | ftlbf | फुट·पाउंडबल | 1.0 फुट·पाउंडबल (1.4 जूल) | ||||
ftlb-f | फुट·पाउंडबल | ||||||
इंच-पाउंड बल | inlbf | इंच·पाउंडबल | 1.0 इंच·पाउंडबल (110 मिलीजूल) | ||||
inlb-f | इंच·पाउंडबल | ||||||
इंच-औंस बल | inozf | इंच·औंसबल | 1.0 इंच·औंसबल (7.1 मिलीजूल) | ||||
inoz-f | इंच·औंसबल | ||||||
हार्सपावर-घंटा | hph | hp·h | 1.0 hp·h (0.75 kWh) | ||||
British thermal unit | ब्रिटिश ऊष्मा इकाई | Btu | Btu | The International Steam Table British thermal unit is used. For others, see the full list. | 1.0 Btu (1.1 किलोजूल) | ||
BTU | BTU | ||||||
TNT-based units | gigatonne of TNT | GtTNT | (none) | 1.0 gigatonne of TNT (4.2 एक्साजूल) | |||
gigaton of TNT | GtonTNT | (none) | |||||
megatonne of TNT | MtTNT | (none) | 1.0 megatonne of TNT (4.2 पेटाजूल) | ||||
megaton of TNT | MtonTNT | Mt | |||||
kilotonne of TNT | ktTNT | (none) | 1.0 kilotonne of TNT (4.2 टेराजूल) | ||||
kiloton of TNT | ktonTNT | kt | |||||
tonne of TNT | tTNT | (none) | 1.0 tonne of TNT (4.2 गीगाजूल) | ||||
ton of TNT | tonTNT | (none) | |||||
Other | |||||||
Hartree | Eh | Eh | 1.0 Eh (27 eV) | ||||
rydberg | Ry | Ry | 1.0 Ry (14 eV) | ||||
tonne of oil equivalent | toe | toe | 1.0 toe (42 गीगाजूल) | ||||
barrel of oil equivalent | BOE | BOE | 1.0 BOE (6.1 गीगाजूल) | ||||
cubic foot of natural gas | cuftnaturalgas (cufootnaturalgas) | Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. | 1.0 cubic foot of natural gas (1.1 मेगाजूल) | ||||
litre-atmosphere | latm | l·atm | 1.0 l·atm (100 जूल) | ||||
Latm | L·atm | ||||||
इंपीरियल गैलन एटमॉस्फीयर | impgalatm | imp gal·atm | 1.0 imp gal·atm (460 जूल) | ||||
US gallon-atmosphere | USgalatm (usgalatm) |
US gal·atm | 1.0 US gal·atm (380 जूल) | ||||
U.S.galatm (usgalatm) |
U.S. gal·atm |
| |||||
FORCE (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | गीगान्यूटन | GN | (none) | Allows triple output units. See: full list. | 1.0 गीगान्यूटन (220,000,000 lbf) |
| |
मेगान्यूटन | MN | (none) | Allows triple output units. See: full list. | 1.0 मेगान्यूटन (220,000 lbf) |
| ||
किलोन्यूटन | kN | (none) | Allows triple output units. See: full list. | 1.0 किलोन्यूटन (220 lbf) |
| ||
न्यूटन | N | (none) | 1.0 न्यूटन (0.22 lbf) |
| |||
मिलीन्यूटन | mN | (none) | 1.0 मिलीन्यूटन (0.00022 lbf) |
| |||
माइक्रोन्यूटन | µN (uN) | (none) | 1.0 माइक्रोन्यूटन (2.2×10−7 lbf) |
| |||
नैनोन्यूटन | nN | (none) | 1.0 नैनोन्यूटन (2.2×10−10 lbf) |
| |||
cgs | megadyne | Mdyn | Mdyn | 1.0 Mdyn (2.2 lbf) | |||
किलोडाइन | kdyn | kdyn | 1.0 kdyn (0.036 ozf) | ||||
डाइन | dyn (dyne) |
(none) | 1.0 डाइन (0.016 ग्रेनबल) | ||||
millidyne | mdyn | mdyn | 1.0 mdyn (1.6×10−5 ग्रेनबल) | ||||
Metric gravitational units | tonne-force | t-f | tf | 1.0 tf (9.8 किलोन्यूटन; 0.98 LTf; 1.1 STf) | |||
tf | tf | ||||||
kilogram-force | kg-f | kgf | 1.0 kgf (9.8 न्यूटन; 2.2 lbf) | ||||
kgf | kgf | ||||||
ग्राम-बल | g-f | ग्राबल | 1.0 ग्राबल (9.8 मिलीन्यूटन; 0.035 ozf) | ||||
gf | ग्रामबल | ||||||
milligram-force | mg-f | mgf | 1.0 mgf (9.8 माइक्रोन्यूटन; 0.015 ग्रेनबल) | ||||
mgf | mgf | ||||||
Avoirdupois-based units | poundal | pdl | pdl | 1.0 pdl (0.14 न्यूटन) | |||
लांग टन-बल | LT-f | LTf | 1.0 LTf (10.0 किलोन्यूटन) |
| |||
LTf | लांग टन-बल |
| |||||
short ton-force | ST-f | STf | 1.0 STf (8.9 किलोन्यूटन) |
| |||
STf | short ton-force |
| |||||
पाउंड-बल | lb-f | lbf | 1.0 lbf (4.4 न्यूटन) | ||||
lbf | lbf | ||||||
ग्रेन-बल | gr-f | ग्रेनबल | 1.0 ग्रेनबल (640 माइक्रोन्यूटन) | ||||
grf | ग्रेन-बल |
| |||||
LENGTH (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | मेगामीटर | Mm | मेगामी | US spelling: megameter |
1.0 मेगामी (3,280,839 फुट 11 इंच) | ||
किलोमीटर | km | किमी | US spelling: kilometer |
1.0 किमी (0.62 मील) |
| ||
मीटर | m | मी | US spelling: meter |
1.0 मी (3 फुट 3 इंच) |
| ||
सेंटीमीटर | cm | सेमी | US spelling: centimeter |
1.0 सेमी (0.39 इंच) |
| ||
मिलीमीटर | mm | मिमी | US spelling: millimeter |
1.0 मिमी (0.039 इंच) |
| ||
माइक्रोमीटर | µm (um) | µमी | US spelling: micrometer |
1.0 µमी (3.9×10−5 इंच) | |||
नैनोमीटर | nm | nमी | US spelling: nanometer |
1.0 nमी (3.9×10−8 इंच) | |||
non-SI metric | एंगस्ट्रम | Å (angstrom) |
Å | 1.0 Å (3.9×10−9 इंच) | |||
Imperial & US customary |
मील | mi | (none) | 1.0 मील (1.6 किमी) |
| ||
फर्लांग | furlong | (none) | 1.0 फर्लांग (660 फीट; 200 मी) | ||||
जरीब | chain | (none) | 1.0 जरीब (66 फीट; 20 मी) | ||||
लट्ठा | rd | rd | For other names of this unit see the full list. | 1.0 rd (17 फीट; 5.0 मी) | |||
फैदम | fathom | (none) | fathom ≡ 6 ft | 1.0 फैदम (6.0 फीट; 1.8 मी) | |||
गज | yd | (none) | assumes the international definition | 1.0 गज (0.91 मी) | |||
फुट | ft (foot) | (none) | long code "foot" outputs foot (and never feet) | 1.0 फुट (0.30 मी) |
| ||
इंच | in | (none) | 1.0 इंच (25 मिमी) |
| |||
Other | समुंद्री मील | nmi | समु-मील | the international standard nautical mile For other nautical miles see the full list. |
1.0 समु-मील (1.9 किमी; 1.2 मील) | ||
पारसेक | pc | pc | 1.0 pc (3.3 प्रकाशवर्ष) | ||||
प्रकाश-बरिस | ly | प्रकाशवर्ष | 1.0 प्रकाशवर्ष (63,000 AU) | ||||
खगोलीय इकाई | AU | AU | 1.0 AU (150,000,000 किमी; 93,000,000 मील) |
| |||
MASS (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | किलोग्राम | kg | किग्रा | Allows triple output units. See: full list. | 1.0 किग्रा (35 औंस) |
| |
ग्राम | g | ग्रा | 1.0 ग्रा (0.035 औंस) |
| |||
मिलीग्राम | mg | मिग्रा | 1.0 मिग्रा (3.5×10−5 औंस) |
| |||
माइक्रोग्राम | µg (ug) | µग्रा | 1.0 µग्रा (3.5×10−8 औंस) | ||||
non-SI metric | टन | t | (none) | Allows triple output units. See: full list. | 1.0 टन (0.98 लांग टन; 1.1 शार्ट टन) |
| |
मीटरी टन | MT | t |
| ||||
Avoirdupois | लांग टन | LT | (none) | 2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list. |
1.0 लांग टन (1.0 टन) |
| |
long ton | लांग टन | ||||||
शार्ट टन | ST | (none) | 2,000 lb used mostly in the US. Allows triple output units. See: full list. |
1.0 शार्ट टन (0.91 टन) |
| ||
short ton | शार्ट टन | ||||||
स्टोन | st | (none) | 14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list. |
1.0 स्टोन (14 पाउंड; 6.4 किग्रा) |
| ||
पाउंड | lb | (none) | Allows triple output units. See: full list. | 1.0 पाउंड (0.45 किग्रा) |
| ||
औंस | oz | (none) | 1.0 औंस (28 ग्रा) |
| |||
ड्राम | drachm | (none) | 1.0 ड्राम (1.8 ग्रा) | ||||
ड्राम | dram | (none) | |||||
ग्रेन | gr | ग्रे | equivalent to the troy grain | 1.0 ग्रे (0.065 ग्रा) | |||
Troy | troy ounce | ozt | ozt | 1.0 ozt (1.1 औंस; 31 ग्रा) | |||
other | कैरट | carat | (none) | 1.0 कैरट (0.20 ग्रा) |
| ||
SPEED (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | मीटर प्रति सेकेंड | m/s | मी/से | US spelling: meter per second |
1.0 मी/से (3.3 फुट/से) |
| |
non-SI metric | किलोमीटर प्रति घंटा | km/h | किमी/घं | US spelling: kilometer per hour |
1.0 किमी/घं (0.62 मील/घं) |
| |
Imperial & US customary |
मील प्रति घंटा | mph | मील/घं | 1.0 मील/घं (1.6 किमी/घं) |
| ||
फुट प्रति सेकेंड | ft/s (foot/s) | फुट/से | long code "foot/s" outputs foot per second (and never feet) | 1.0 फुट/से (0.30 मी/से) |
| ||
Maritime units | नॉट | kn (knot) | kn | 1.0 kn (1.9 किमी/घं; 1.2 मील/घं) |
| ||
TEMPERATURE (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | K | K | K | Allows triple output units. See: full list. | 1.0 K (−272.15 °C; −457.87 °F) |
| |
°C | °C (C) | °C | 1.0 °C (33.8 °F) |
| |||
Imperial & US customary |
°R | °R (R) | °R | 1.0 °R (0.556 K; −458.670 °F; −272.594 °C) |
| ||
°F | °F (F) | °F | 1.0 °F (−17.2 °C) |
| |||
Celsius change | C-change | Used for temperature intervals instead of actual temperatures Example: {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer | |||||
Fahrenheit change | F-change | Used for temperature intervals instead of actual temperatures Example: {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
| |||||
TORQUE (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
Industrial | |||||||
SI | न्यूटन मीटर | Nm | (none) | Triple combinations are also possible. See the full list. | 1.0 न्यूटन मीटर (0.74 lbf·ft) |
| |
Non-SI metric | किलोग्राम मीटर | kg.m | किग्रा·मी | 1.0 किग्रा·मी (9.8 न्यूटन मीटर; 7.2 पौंड·फुट) |
| ||
Imperial & US customary |
पौंड बल-फुट | lb.ft | पौंड·फुट | 1.0 पौंड·फुट (1.4 न्यूटन मीटर) |
| ||
Scientific | |||||||
SI | न्यूटन मीटर | N.m | (none) | Triple combinations are also possible. See the full list. | 1.0 न्यूटन मीटर (0.74 lbf·ft) |
| |
Non-SI metric | किलोग्राम बल-मीटर | kgf.m | kgf·m | 1.0 kgf·m (9.8 न्यूटन मीटर; 7.2 lbf·ft) |
| ||
Imperial & US customary |
pound force-foot | lbf.ft | lbf·ft | 1.0 lbf·ft (1.4 न्यूटन मीटर) |
| ||
VOLUME (Full list) | |||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units | |
SI | घन मीटर | m3 | मी3 | US spelling: cubic meter one kilolitre |
1.0 मी3 (35 घन फुट) | ||
सेंटीघन मीटर | cm3 | सेमी3 | US spelling: cubic centimeter one millilitre |
1.0 सेमी3 (3.5×10−5 घन फुट) | |||
cc | सीसी | ||||||
मिलीघन मीटर | mm3 | मिमी3 | US spelling: cubic millimeter |
1.0 मिमी3 (3.5×10−8 घन फुट) | |||
non-SI metric | किलोलिटर | kl | किलि | US spelling: kiloliter one cubic metre |
1.0 किलि (220 इंपीरियल गैलन; 260 यूएस गैलन) | ||
kL | किलि | ||||||
लिटर | l | लि | US spelling: liter one cubic decimetre Allows triple output units. See: full list. |
1.0 लि (0.22 इंपीरियल गैलन; 0.26 यूएस गैलन) |
| ||
L | लि |
| |||||
सेंटीलिटर | cl | सेलि | US spelling: centiliter |
1.0 सेलि (0.0022 इंपीरियल गैलन; 0.0026 यूएस गैलन) | |||
cL | सेलि | ||||||
मिलीलिटर | ml | मिलि | US spelling: milliliter one cubic centimetre |
1.0 मिलि (0.00022 इंपीरियल गैलन; 0.00026 यूएस गैलन) |
| ||
mL | मिलि |
| |||||
Imperial & US customary |
घन गज | cuyd | घन गज | 1.0 घन गज (0.76 मी3) | |||
घनफुट | cuft (cufoot) | घन फुट | long code "cufoot" outputs cubic foot (and never feet) | 1.0 घन फुट (0.028 मी3) | |||
घन इंच | cuin | घन इंच | 1.0 घन इंच (16 सेमी3) | ||||
Imperial | इंपीरियल बैरल | impbbl | इंपीरियल बैरल | 36 imp gal | 1.0 इंपीरियल बैरल (160 लि; 36 इंपीरियल गैलन; 43 यूएस गैलन) | ||
इंपीरियल बुशेल | impbsh | इंपीरियल बुशेल | 8 imp gal | 1.0 इंपीरियल बुशेल (36 लि; 8.0 इंपीरियल गैलन; 8.3 US dry gal) | |||
impbu | इंपीरियल बुशेल | ||||||
इंपीरियल गैलन | impgal | इंपीरियल गैलन | 4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list. |
1.0 इंपीरियल गैलन (4.5 लि; 1.2 यूएस गैलन) |
| ||
imperial quart | impqt | imp qt | 1/4 imp gal or 40 imp fl oz | 1.0 imp qt (1,100 मिलि; 38 यूएस फ्लूइड औंस) | |||
imperial pint | imppt | imp pt | 1/8 imp gal or 20 imp fl oz | 1.0 imp pt (0.57 लि) | |||
इंपीरियल फ्लूइड औंस | impoz (impfloz) | इंपीरियल फ्लूइड औंस | 1/160 imp gal | 1.0 इंपीरियल फ्लूइड औंस (28 मिलि; 0.96 यूएस फ्लूइड औंस) |
| ||
US customary liquid measure |
यूएस बैरल | USbbl | यूएस बैरल | 31½ US gal used for liquids except for oil and beer (see the full list) |
1.0 यूएस बैरल (120 लि; 32 यूएस गैलन; 26 इंपीरियल गैलन) | ||
U.S.bbl | U.S. bbl | ||||||
बैरल | oilbbl | bbl | 42 US gal | 1.0 bbl (0.16 मी3) | |||
यूएस बियर बैरल | USbeerbbl (usbeerbbl) |
यूएस बियरबैरल | 1.0 यूएस बियरबैरल (120 लि; 31 यूएस गैलन; 26 इंपीरियल गैलन) | ||||
U.S.beerbbl (usbeerbbl) |
U.S. bbl | ||||||
यूएस गैलन | USgal | यूएस गैलन | 231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list. |
1.0 यूएस गैलन (3.8 लि; 0.83 इंपीरियल गैलन) |
| ||
U.S.gal | यू.एस. गैलन |
| |||||
US quart | USqt | US qt | 1/4 US gal or 32 US fl oz | 1.0 US qt (950 मिलि) | |||
U.S.qt | U.S. qt | ||||||
US pint | USpt | US pt | 1/8 US gal or 16 US fl oz | 1.0 US pt (0.47 लि; 0.83 imp pt) | |||
U.S.pt | U.S. pt | ||||||
यूएस फ्लूइड औंस | USoz (USfloz) |
यूएस फ्लूइड औंस | 1/128 US gal | 1.0 यूएस फ्लूइड औंस (30 मिलि) |
| ||
U.S.oz (U.S.floz) |
यू.एस. फ्लूइड औंस |
| |||||
US customary dry measure |
US dry barrel | USdrybbl | US dry bbl | 105/32 US bsh | 1.0 US dry bbl (0.12 मी3) | ||
U.S.drybbl | U.S. dry bbl | ||||||
यूएस बुशेल | USbsh | यूएस बुशेल | 2150.42 cubic inches by definition | 1.0 यूएस बुशेल (35 लि; 8.0 US dry gal; 7.8 इंपीरियल गैलन) | |||
U.S.bsh | U.S. bsh | ||||||
यूएस बुशेल | USbu | यूएस बुशेल | 2150.42 cubic inches by definition | 1.0 यूएस बुशेल (35 लि; 8.0 US dry gal; 7.8 इंपीरियल गैलन) | |||
U.S.bu | U.S. bu | ||||||
US dry gallon | USdrygal | US dry gal | 1/8 US bsh Allows triple output units. See: full list. |
1.0 US dry gal (4.4 लि) |
| ||
U.S.drygal | U.S. dry gal |
| |||||
US dry quart | USdryqt | US dry qt | 1/32 US bsh | 1.0 US dry qt (1,100 मिलि) | |||
U.S.dryqt | U.S. dry qt | ||||||
US dry pint | USdrypt | US dry pt | 1/32 US bsh | 1.0 US dry pt (550 मिलि) | |||
U.S.drypt | U.S. dry pt |
| |||||
PRESSURE | |||||||
unit | unit- code |
abbrev- iation |
sample default conversion |
||||
गीगापास्कल | GPa | (none) | 1.0 गीगापास्कल (150,000 psi) | ||||
मेगापास्कल | MPa | (none) | 1.0 मेगापास्कल (150 psi) | ||||
किलोपास्कल | kPa | (none) | 1.0 किलोपास्कल (0.15 psi) | ||||
हेक्टोपास्कल | hPa | (none) | 1.0 हेक्टोपास्कल (0.015 psi) | ||||
पास्कल | Pa | (none) | 1.0 पास्कल (0.00015 psi) | ||||
मिलीपास्कल | mPa | (none) | 1.0 मिलीपास्कल (1.5×10−7 psi) | ||||
मिलिबार | mbar | मिबार | 1.0 मिबार (1.0 हेक्टोपास्कल) | ||||
mb | मिबा | ||||||
डेसीबार | dbar | डेबार | 1.0 डेबार (10 किलोपास्कल) | ||||
बार | bar | (none) | 1.0 बार (100 किलोपास्कल) | ||||
kilobarye | kBa | kBa | 1.0 kBa (1.0 हेक्टोपास्कल) | ||||
barye | Ba | Ba | 1.0 Ba (0.10 पास्कल) | ||||
स्टैंडर्ड एटमॉस्फीयर | atm | atm | 1.0 atm (100 किलोपास्कल) | ||||
टोर | Torr | (none) | 1.0 टोर (0.13 किलोपास्कल) | ||||
मिलिमीटर पारा | mmHg | mmHg | 1.0 mmHg (0.13 किलोपास्कल) | ||||
इंच पारा | inHg | inHg | 1.0 inHg (3.4 किलोपास्कल) | ||||
पाउंड प्रति वर्ग इंच | psi | psi | 1.0 psi (6.9 किलोपास्कल) | ||||
FUEL EFFICIENCY | |||||||
unit | unit- code |
notes | combinations | ||||
kilometres per litre | km/l (km/L) | Use km/L to get "km/L"
|
| ||||
litres per 100 kilometres | l/100 km (L/100 km) | Use L/100 km to get "L/100 km"
|
| ||||
litres per kilometre | l/km (L/km) | Use L/km to get "L/km"
|
| ||||
miles per imperial gallon | mpgimp |
| |||||
miles per US gallon | mpgus (mpgUS, mpgU.S.) | Use mpgUS to get "US"Use |
| ||||
imperial gallons per mile | impgal/mi |
| |||||
US gallons per mile | usgal/mi (USgal/mi, U.S.gal/mi) | As above with the us vs US vs U.S.
|
| ||||
The mpgUS , mpgU.S. , USgal/mi vs U.S.gal/mi , km/L , L/100 km and L/km variants work within combinations also (making 36 combinations in total).
| |||||||
POWER | |||||||
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example) | |||||||
POPULATION DENSITY | |||||||
unit | unit- code |
notes | combinations | ||||
inhabitants per square kilometre | PD/sqkm | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square kilometre | /sqkm | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per hectare | PD/ha |
| |||||
per hectare | /ha |
| |||||
inhabitants per square mile | PD/sqmi | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square mile | /sqmi | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per acre | PD/acre |
| |||||
per acre | /acre |
| |||||
COST PER UNIT MASS | |||||||
unit | unit- code |
notes | combinations | ||||
dollars per pound | $/lb | "$" can mean US$, HK$, etc. |
| ||||
dollars per kilogram | $/kg |
| |||||
dollars per troy ounce | $/ozt | 12 troy ounces in 1 troy pound |
|
'per' units: kg/hl
संपादन करींWhen using a slash (/
), a unit like kg/hl
is recognized as kilograms per hectolitre and will be converted with other mass/volume units.
{{convert|1000|kg/hl}}
→ 1,000 किलोग्राम per हेक्टोलिटर (1,600 औंस/इंपीरियल गैलन)
Units of difference: 10 °C higher; how much in °F
संपादन करींWhen a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.
The only available units of difference are: |C-change=
, |F-change=
and |K-change=
.
{{convert|10|C}}
→ 10 °C (50 °F), regular temperature{{convert|10|C-change}}
→ 10 °C (18 °F), difference (e.g., "The temperature changed from 30 into 40 °C"){{convert|10-15|C}}
→ 10–15 °C (50–59 °F), range (e.g., "The temperature is between 10 and 15 °C")
Consistently, into multiple units:
A rise of {{convert|10|C-change|F-change K-change}}
→ A rise of 10 °C (18 °F; 10 K)
Multiple units: 1 ft 5 in
संपादन करींIn input
संपादन करींBase document § Input multiples lists options for multiple unit input (like ft,in
). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):
{{convert|1|yd|2|ft|3|in}}
→ 1 गज 2 फीट 3 इंच (1.60 मी){{convert|2|ft|3|in|cm}}
→ 2 फीट 3 इंच (69 सेमी){{convert|1|lb|5|oz|g}}
→ 1 पाउंड 5 औंस (600 ग्रा)
In output
संपादन करींAvailable multiple-unit output options predefined, like ftin
and ydftin
. The full list is at § Output multiples.
{{convert|2|m|ftin}}
→ 2 मीटर (6 फुट 7 इंच){{convert|2|m|ft in}}
→ 2 मीटर (6.6 फीट; 79 इंच), using a space, returns the decimal point
Default behaviour, for comparison:
{{convert|2|m}}
→ 2 मीटर (6 फुट 7 इंच)
See also:
Currency per unit: $/mi → $/km
संपादन करींUsing currency symbols in a $ per unit value, you can convert the per-unit:
{{convert|10|$/mi|$/km}}
→ $10 per मील ($6.2/किमी)
You can set the currency in both values using |$=€
:
{{convert|10|$/mi|$/km|$=€}}
→ €10 per मील (€6.2/किमी)
It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km)
Parameter list
संपादन करींParameter options for {{convert}} | |||
---|---|---|---|
Parameter | Value | Description | Note |
|abbr=in |
Use symbol for first (left-hand side) unit | Symbol ('abbreviation') | |
|abbr=off |
Use name for all units | Symbol ('abbreviation') | |
|abbr=none |
|||
|abbr=on |
Use symbol for all units | Symbol ('abbreviation') | |
|abbr=out |
Use symbol for right-hand side unit (default) | Symbol ('abbreviation') | |
|abbr=unit |
Use symbol for all units when using scientific notation | Symbol ('abbreviation') | |
|abbr=values |
Show only input and output numbers, not units | Parts only | |
|abbr=~ |
Shows both unit name and symbol | Symbol & name | |
|adj=mid|… |
User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.
|
Word adding, adjective | |
|adj=on |
Unit name is adjective (singular and hyphenated) | Grammar, adjective | |
|adj=pre|… |
User-specified text before input unit. Expects 1 unnamed parameter. | Word adding | |
|adj=ri0 |
Round input with precision 0 | Rounding and significant figures | |
|adj=ri1 |
Round input with precision 1 | Rounding and significant figures | |
|adj=ri2 |
Round input with precision 2 | Rounding and significant figures | |
|adj=ri3 |
Round input with precision 3 | Rounding and significant figures | |
|disp=b |
Join input and output using " (...)" (default) | Join values | |
|disp=sqbr |
Join input and output using " [...]" | Join values | |
|disp=br |
Join input and output using "<br/>" | Join values | |
|disp=comma |
Join input and output using ", " | Join values | |
|disp=or |
Join input and output using " or " | Join values | |
|disp=number |
Display output number only | Parts only | |
|disp=output number only |
|||
|disp=out |
Display only output number and name/symbol | Parts only | |
|disp=output only |
|||
|disp=preunit|…[|…] |
Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters. | Word adding | |
|disp=table |
Output is suitable for a table cell with align="right" | Table columns | |
|disp=tablecen |
Output is suitable for a table cell with align="center" | Table columns | |
|disp=unit |
Display input name/symbol only (not input number, not output) | Parts only | |
|disp=unit2 |
Display output name/symbol only (not input; not output number) | Parts only | |
|disp=x|... |
Join input and output using user-specified text | Word adding | |
|comma=5 |
Only use comma for thousands separator if 5 or more digits | Number format | |
|comma=gaps |
Use gaps (space), not comma, for thousands separator | Number format | |
|comma=gaps5 |
Use gaps (space), but only if 5 or more digits | Number format | |
|comma=off |
No thousands separator | Number format | |
|frac=N |
Show imperial number in fractions, denominator=N | Number format, fraction | |
|lk=in |
Link left-hand side unit name or symbol | Unit link | |
|lk=on |
Link all unit names or symbols (but not twice for the same unit) | Unit link | |
|lk=out |
Link right-hand side unit name or symbol | Unit link | |
|order=flip |
Inverts order of input, output measurements (conversion first) | Order | |
|round=5 |
Rounds calculation to the nearest multiple of 5 | Rounding and significant figures | |
|round=25 |
Rounds calculation to the nearest multiple of 25 | Rounding and significant figures | |
|round=each |
In a range, each number is rounded by the default rounding | Rounding and significant figures | |
|sigfig=N |
Round output number to N significant figures (N is a positive integer) | Rounding and significant figures | |
|sortable=in |
Output numeric hidden sort field for use in a sortable table (based on input) | Table sort | |
|sortable=on |
|||
|sortable=out |
Output numeric hidden sort field for use in a sortable table (based on output) | Table sort | |
|sp=us |
Use U.S. spelling (like "meter" instead of default "metre") | Spelling U.S. names | |
|spell=in |
Spell input number in words | Spelling numbers | |
|spell=In |
Spell input number in words with first letter uppercase | Spelling numbers | |
|spell=on |
Spell input and output numbers in words | Spelling numbers | |
|spell=On |
Spell input and output numbers in words with first letter uppercase | Spelling numbers | |
|$=€ |
Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)
|
Cost per unit | |
|debug=yes |
Debugging only. In a sortable table: show the normally hidden sort key | Table sort | |
|abbr=comma |
Deprecated. Use |comma=off | Number format | |
|abbr=mos |
Deprecated. Use |x| or |by| | Range format | |
|adj=1 |
Deprecated. Do not use. No need to deviate from regarding plurals | Plural or singular | |
|adj=flip |
Deprecated. Use |order=flip | Order | |
|adj=j |
Deprecated. Do not use. No need to join number and unit with . Not by MOS, and could be misunderstood HTML
|
Join values | |
|adj=nocomma |
Deprecated. Use |comma=off | Number format | |
|disp=2 |
Deprecated. Use |disp=output only | Parts only | |
|disp=5 |
Deprecated. Use |round=5 | Rounding and significant figures | |
|disp=flip |
Deprecated. Use |order=flip | Order | |
|disp=flip5 |
Deprecated. Use |order=flip |round=5 | Order, rounding | |
|disp=nocomma |
Deprecated. Use |comma=off | Number format | |
|disp=u2 |
Deprecated. Use |disp=unit2 | Parts only | |
|near=5 |
Deprecated. Use |round=5 | Rounding and significant figures |
Deprecated options
संपादन करींDeprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.
- abbr=comma is deprecated. Use comma=off instead
- abbr=mos, setting range separators, is deprecated (not compliant). Use |by| or |x| instead
- adj=1 is deprecated. No need to deviate from regarding plurals
- adj=flip is deprecated. Use order=flip instead
- adj=j is deprecated. No need to use NBSP before full unit name. See MOS
- adj=nocomma is deprecated. Use comma=off instead
- disp=2 is deprecated. Use disp=output only instead
- disp=5 is deprecated. Use round=5 instead
- disp=flip is deprecated. Use order=flip instead
- disp=flip5 is deprecated. Use |order=flip |round=5 instead
- disp=nocomma is deprecated. Use comma=off instead
- disp=slash, disp=s, disp=/ are deprecated. Use disp=or instead
- disp=u2 is deprecated. Use disp=unit2 instead
- near=5 is deprecated. Use round=5 instead
- sing= is deprecated in any situation. Use adj= instead
- Range separator |xx| is deprecated (not compliant). Use |x| instead
- Range separator |*| is deprecated (not compliant). Use |x| instead
- Range separator |&| is deprecated. Use |and| instead
- Range separator |to-| is deprecated. Use |to(-)| instead
TemplateData
संपादन करींTemplateData for Convert
Converts measurements to other units.
Parameter | Description | Type | Status | |
---|---|---|---|---|
value | 1 | the value to convert | Number | required |
from unit | 2 | the unit for the provided 'value'
| Line | required |
to units | 3 | the unit to convert into
| String | suggested |
precision or suffix | 4 | significant digits after decimal dot or, if negative, exponent of ten | Number | optional |
link units | lk | “on” all, “in” input, “out” output or “off” no units
| String | optional |
abbreviation | abbr | display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “unit” both input and output units abbreviated when using scientific notation, “values” no units at all
| String | optional |
spelling | sp | “us” display U.S. spelling of unit names
| String | optional |
adjective | adj | adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end
| Boolean | optional |
conversion | disp | display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision
| String | optional |
ordering | order | “flip” returns converted value first, input value second.
| String | optional |
significant figures | sigfig | number that sets the number of significant figures | Number | optional |
rounding output | round | “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range | Number | optional |
thousands separator | comma | Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more)
| String | optional |
sort key | sortable | “on” generates a hidden sort key
| String | optional |
परिचय खातिर ऊपर दिहल गइल बिबरनलेख के टेम्पलेट:Convert/doc से ट्रांसक्लूड क के इहाँ देखावल जा रहल बाटे। (संपादन करीं | इतिहास देखीं) संपादक लोग एह टेम्पलेट के अभ्यासपन्ना (सैंडबाक्स) (संपादित करीं | अंतर) आ टेस्टकेस (बनाईं) पन्ना सभ पर अभ्यास आ प्रयोग (टेस्टिंग) क सकत बाटे। अनुरोध बा कि अगर श्रेणी जोड़े के होखे तब /doc उपपन्ना (सबपेज) पर जोड़ल जाय। एह टेम्पलेट के उपपन्ना (सबपेज) देखीं। |